Mathematical Misconceptions: 20 Things About Maths That Most People Get Wrong

Is 0.999… really equal to 1? Why can’t we divide by zero? Is every square a rectangle? Some mathematical rules seem strange until you understand the reasoning behind them. Here are 20 common mathematical misconceptions, explained with simple examples.

Numbers and Arithmetic

01

0.999… Is Exactly Equal to 1

Misconception: 0.999… is slightly smaller than 1.

Truth: 0.999… and 1 are exactly the same number.

Let x = 0.999…

10x = 9.999…
10x − x = 9.999… − 0.999…
9x = 9
x = 1

There is no positive real-number gap between 0.999… and 1. The repeating decimal is simply another representation of 1.

02

Why Division by Zero Is Undefined

Misconception: Dividing a number by zero gives infinity.

Truth: Division by zero is undefined.

Division reverses multiplication. If 6 ÷ 0 = x, then 0 × x must equal 6.

But zero multiplied by any real number is always zero. No such x exists.

6 ÷ 0 = undefined
0 ÷ 0 = indeterminate as a division expression

For 0 ÷ 0, every number satisfies 0 × x = 0, so division cannot give a unique answer.

03

Why a Negative Times a Negative Is Positive

Misconception: Multiplying two negative numbers should produce another negative number.

Truth: Negative × negative = positive.

Consider the pattern:

(−3) × 3 = −9
(−3) × 2 = −6
(−3) × 1 = −3
(−3) × 0 = 0
(−3) × (−1) = +3

Each time the second number decreases by 1, the result increases by 3. The pattern continues consistently into negative numbers.

04

Why 1 Is Not a Prime Number

Misconception: Since 1 is divisible only by itself, it must be prime.

Truth: The number 1 is neither prime nor composite.

A prime number must have exactly two distinct positive factors: 1 and itself.

2: Factors 1, 2 → Prime
3: Factors 1, 3 → Prime
1: Only factor 1 → Not prime

Excluding 1 also preserves the unique prime factorization of every integer greater than 1.

05

Zero Is an Even Number

Misconception: Zero is neither odd nor even.

Truth: Zero is even.

An integer is even if it can be expressed as 2 multiplied by an integer.

0 = 2 × 0

Zero is also divisible by 2 with no remainder. Therefore, it satisfies the definition of an even number.

06

Multiplication Doesn’t Always Make Numbers Bigger

Misconception: Multiplying always increases a number.

Truth: Multiplying a positive number by a value between 0 and 1 makes it smaller.

20 × 2 = 40
20 × 0.5 = 10
20 × 0.1 = 2

Multiplication is scaling, not necessarily increasing.

07

Division Doesn’t Always Make Numbers Smaller

Misconception: Dividing always decreases a number.

Truth: Dividing a positive number by a positive fraction smaller than 1 makes it larger.

10 ÷ 2 = 5
10 ÷ 0.5 = 20
10 ÷ 0.25 = 40

Dividing by 0.25 asks how many quarters fit into 10. The answer is 40.

08

There Are Infinitely Many Numbers Between Any Two Different Real Numbers

Misconception: Two sufficiently close numbers have no numbers between them.

Truth: Between any two distinct real numbers, infinitely many real numbers exist.

Between 0 and 0.001, we can find:

0.0005
0.00025
0.000125
0.0000625
…and infinitely many more.

You can always find another number between two distinct real numbers by taking their average.

09

Infinity Is Not the Largest Real Number

Misconception: Infinity is the biggest number possible.

Truth: There is no largest real number.

For any real number you choose, adding 1 produces a larger number.

1,000,000 → 1,000,001
10100 → 10100 + 1

Infinity describes something unbounded. It is not an ordinary real number sitting at the end of the number line.

10

0.333… Is Exactly One-Third

Misconception: 0.333… is only an approximation of 1/3.

Truth: The infinitely repeating decimal 0.333… equals exactly 1/3.

1 ÷ 3 = 0.333…
3 × 0.333… = 0.999… = 1

However, a finite decimal such as 0.333 or 0.3333 is only an approximation of one-third.

Fractions and Percentages

11

Percentages Can Be Greater Than 100%

Misconception: A percentage cannot exceed 100.

Truth: Percentages can exceed 100% when measuring increases or ratios.

If a company’s sales increase from ₹100 to ₹350:

Percentage increase = (250 ÷ 100) × 100
= 250%

100% represents the full reference amount, not a universal upper limit on every percentage.

12

A 50% Increase Followed by a 50% Decrease Doesn’t Cancel Out

Misconception: Equal percentage increases and decreases return a value to its original amount.

Truth: A 50% increase followed by a 50% decrease produces a 25% net decrease.

Starting value = 100
After 50% increase = 150
After 50% decrease = 75
Net change = −25%

The second percentage is calculated on 150, not the original 100.

Geometry and Measurement

13

Doubling a Square’s Side Quadruples Its Area

Misconception: Doubling a square’s side doubles its area.

Truth: The area becomes four times as large.

Side = 3 cm → Area = 9 cm²
Side = 6 cm → Area = 36 cm²

Area depends on the square of the side length. Doubling all lengths in a 2D shape multiplies its area by 4.

14

A Larger Perimeter Doesn’t Necessarily Mean a Larger Area

Misconception: A shape with a larger perimeter must have a larger area.

Truth: Perimeter and area measure different properties.

Rectangle A: 10 cm × 1 cm
Perimeter = 22 cm | Area = 10 cm²

Rectangle B: 4 cm × 4 cm
Perimeter = 16 cm | Area = 16 cm²

Rectangle A has a larger perimeter but a smaller area.

15

Every Square Is a Rectangle

Misconception: Squares and rectangles are completely separate shapes.

Truth: Every square is a rectangle, but not every rectangle is a square.

A rectangle is a quadrilateral with four right angles. A square satisfies that definition and also has four equal sides.

Square: Four right angles + four equal sides
Rectangle: Four right angles; equal sides are not required

A square is a special type of rectangle.

16

Triangle Angles Don’t Always Add Up to 180°

Misconception: Every triangle, on every surface, has angles summing to 180°.

Truth: The 180° rule applies to triangles in flat Euclidean geometry.

On a sphere, a triangle formed by three great-circle arcs can have a larger angle sum.

Imagine a triangle on Earth connecting the North Pole with two points on the equator 90° of longitude apart.

Its angles are 90° + 90° + 90° = 270°.

This is an extension beyond ordinary school geometry; flat-paper triangles still follow the 180° rule.

Algebra and Mathematical Rules

17

The Square Root of a² Is Not Always a

Misconception: √(a²) = a for every real number.

Truth: √(a²) = |a|.

The square root symbol denotes the non-negative principal square root.

If a = −5:
√(a²) = √25 = 5
But a = −5

Therefore, √(a²) equals the absolute value of a, not necessarily a itself.

18

You Cannot Cancel Matching Terms Anywhere in a Fraction

Misconception: Matching symbols in a numerator and denominator can always be cancelled.

Truth: Cancellation applies to common nonzero factors, not arbitrary terms.

Incorrect:
(a + b) / a = b

Correct:
(a + b) / a = 1 + b/a, for a ≠ 0

But (ab)/a = b is valid when a ≠ 0, because a is a common factor of the numerator and denominator.

Statistics and Probability

19

The Average Can Be Misleading

Misconception: The average always describes a typical value.

Truth: Extreme values can distort the arithmetic mean.

Consider five monthly salaries:

₹20,000 | ₹22,000 | ₹24,000 | ₹26,000 | ₹5,00,000

Mean: ₹1,18,400
Median: ₹24,000

Four of the five employees earn far less than the mean. The median better represents a typical salary in this example.

20

Randomness Doesn’t Mean Perfect Balance

Misconception: Random outcomes must alternate or appear equally often in every small sample.

Truth: Randomness allows streaks and uneven results.

When tossing a fair coin five times, getting five heads in a row is possible.

P(HHHHH) = (1/2)5
= 1/32 = 3.125%

A fair coin has equal probabilities for heads and tails on each independent toss, but that doesn’t guarantee equal numbers of heads and tails in a short sequence.

Join Telegram

💼 Placement Tests 🏦 Bank Exam Prep 📄 SSC CGL Prep 📚 CAT Prep 🧠 General Aptitude 9️⃣ CBSE 9 🔟 CBSE 10
Placement Tests Bank Exam Prep SSC CGL Prep CAT Prep General Aptitude CBSE 9 CBSE 10
Scroll to Top